1.在拆卸平衡器時，需要先調節蝸桿反時針轉動，使氣彈簧完全處于松弛狀態時方可進行其他工作。
2.每月應對平衡器進行一次安全檢查，主要檢查內容有：
(1)緊固件是否松動。
(2)上下吊鉤有無碰傷、裂紋及其缺陷。
(3)保險繩是否可靠。
(4)外殼及塔輪應無裂紋、無嚴重磨損。
(5)安全裝置是否能正常工作。
3.長期放置不用，要卸荷保存，注意防潮，以免氣彈簧生銹。

中譯英：
1 When removing the balancer, need to adjust screw counterclockwise rotation, so that the volume of spring is completely relaxed state party may have other job.
2 Monthly coping balancer conducts safety inspections, inspection of the main contents are:
(1) the fastener is loose.
(2) upper and lower hook has no bumps, cracks and defects.
(3) insurance rope are reliable.
(4) shell and a pulley should have no crack, no serious wear.
(5) the safety device can work.
3 Long term not placed, to unload preservation, pay attention to moisture, lest the spring rust.
(圖/文http://tuan90.com/)